Telecom operators once accepted a simple bargain. Buy a tightly bundled radio access network, get a clear line of responsibility, and surrender some supplier choice. The pressure to rethink it is growing as networks carry more data and support more demanding applications.
MIC’s 2026 Information and Communications White Paper reports that Japan’s mobile communications download traffic reached 9.5 Tbps in September 2025, up from 8.1 Tbps a year earlier, a 17.9% rise. Open RAN in Japan now sits at the centre of a wider question. Can operators make networks more flexible without making them harder to run?
The answer depends on automation, integration and economics. For Open RAN in Japan, that pressure makes network architecture a business decision as much as an engineering one.
The Japanese Open RAN Landscape from Greenfield to Global Standard
Japan’s Open RAN story has two distinct starting points. Rakuten Mobile took the greenfield route, building a cloud-native network without the same legacy equipment constraints faced by an established operator. NTT DOCOMO followed a different path. It pursued multi-vendor disaggregation in an established network, opening interfaces and bringing in additional suppliers.
The distinction matters because each route tests a different part of the proposition. A greenfield operator can design around virtualized functions from the outset. An incumbent must work around existing sites, equipment and service obligations. Neither route offers a shortcut. Together, they show why Open RAN in Japan is a transition in network design, not a simple equipment swap. That is why Open RAN in Japan is being watched by operators that need to modernize without replacing every site at once.
The June 2026 METI programme evaluation provides a useful view of the work under way. It tracks Rakuten’s advanced Open RAN integration platform, an infrastructure-sharing project involving NTT DOCOMO, 1FINITY and OREX SAI, and 1FINITY’s energy-saving technology for O-RAN radio units and virtualized base stations. The relevant projects were reported as progressing according to schedule. That shows active development, not commercial scale.
Japan is also extending this work beyond its domestic market. A METI project with a contract effective April 6, 2026, involves OREX SAI producing O-RAN-compliant radio units in India and expanding Open RAN into non-urban areas of India and other Global South markets. Operators in India and the US should not copy Japan’s design wholesale. They can, however, study how open interfaces, local integration capacity and supplier diversity can be adapted to local needs. That export story still depends on local spectrum policy, site economics, supplier capacity and the skills needed to operate multi-vendor networks.
Network Automation at the Core with AI and the RIC
Open RAN changes how operators manage the radio access network. In a traditional arrangement, radio equipment and management tools often sit within a closely linked vendor stack. Teams may rely on separate systems, manual checks and vendor-specific processes to adjust performance or respond to faults. Open interfaces and software-based functions create more room to centralize tasks and automate routine decisions.
The RAN Intelligent Controller, or RIC, is central to this model. It provides a framework for applications that monitor network conditions and guide RAN behavior. The Non-Real-Time RIC supports longer-term optimisation and policy decisions through rApps. The Near-Real-Time RIC supports faster control actions through xApps. Together, they help operators make better decisions about network resources. In this setting, Open RAN in Japan makes automation a way to control complexity, not simply another software layer.
A RIC does not automatically create a self-healing network. Operators still need reliable data, clear policies, tested applications and safeguards against actions that could damage service quality. Zero-touch provisioning also depends on orchestration across the wider network. The shift is from engineers handling routine adjustments manually to software performing suitable tasks within rules set by network teams.
METI’s May 2026 Post-5G R&D plan sets a target of at least a 30% improvement in the network automation rate, measured against the rate at the start of the project. This is a development target, not an achieved result across Japan’s commercial networks.
How does automation improve Open RAN?
- Dynamic resource allocation. Software can respond to changing traffic and service needs by adjusting how available radio resources are used.
- Predictive maintenance through AI. Models can analyze network data to flag patterns that may indicate equipment or performance problems before they become service-affecting faults.
- Automated fault resolution. Predefined workflows can isolate known issues and trigger approved corrective actions, while escalating complex cases to engineers.
For Open RAN in Japan, the RIC will be judged by how reliably these capabilities work across suppliers.
Unlocking Operational Efficiency While Overcoming Integration Hurdles
The operational case for Open RAN begins with choice. Operators can source radio units (RUs), distributed units (DUs) and centralized units (CUs) from different vendors. That widens procurement options, creates room for specialist suppliers and can make individual network components easier to replace or upgrade.
Yet more choice also creates responsibility. Equipment can follow the same interface specifications and still behave differently when combined. Firmware, configuration, timing, transport links and software updates must work together. A product that passes an individual test may still struggle as part of a wider system.
Meanwhile, security needs equal attention. A multi-vendor environment can introduce more interfaces and software dependencies to monitor. It can also complicate patch management and accountability when supplier responsibilities are unclear. Open RAN is not inherently insecure, but openness does not guarantee security.
Pre-integrated platforms reduce the burden by validating equipment combinations before deployment. Continuous integration and continuous deployment pipelines add control. Teams can test software changes, check interfaces, run security checks and catch regressions before updates reach live networks. These methods do not remove integration work, but make it repeatable.
For Open RAN in Japan, efficiency depends on managing a wider supplier ecosystem without letting integration and maintenance consume the flexibility that open architecture promises. The test for Open RAN in Japan is whether operators can keep interfaces secure and predictable across releases.
Cost Optimization Across CAPEX Reductions and OPEX Realities
Open RAN can lower capital costs by reducing dependence on one equipment supplier. Comparing components from multiple vendors gives operators more negotiating power and flexibility to upgrade individual parts of the RAN. Yet choice does not guarantee a lower bill. Integration, testing and multi-vendor support can add costs, especially during early deployment.
The operating-cost case is equally conditional. Centralized management and 自動化 can reduce manual intervention and some site visits. Better resource management can also improve the use of computing and radio capacity. Power savings, however, depend on equipment design, workload management and network configuration. Operators must measure the result rather than assume software-based networks consume less energy.
| Cost area | Legacy RAN | オープンRAN |
| ハードウェア | Often built around a more tightly integrated vendor stack | Allows operators to select compatible components from different suppliers |
| メンテナンス | May be coordinated through one principal vendor | Requires coordination across suppliers, versions and support teams |
| Upgrades | Can depend on the incumbent vendor’s product and release cycle | Offers more component-level flexibility, but needs careful integration testing |
The commercial question is total cost of ownership, not the price of a radio unit or server. For Open RAN in Japan, savings must survive the cost of integration, support and upgrades over time. Open RAN in Japan makes a stronger case when supplier competition and automation outweigh integration, security and lifecycle costs. Operators must track the full network lifecycle, not just procurement.
Future Outlook Across Private 5G, NTN, and the Road to 6G
Open RAN can support private 5G by giving enterprises more flexibility in sourcing and managing radio infrastructure. It may also form part of designs that connect terrestrial systems with non-terrestrial networks, including satellites. Those connections still depend on standards and integration. Open RAN alone does not make satellite connectivity automatic.
Japan’s May 2026 digital cooperation statement with the European Union reaffirmed work on open, secure, diverse and resilient network architectures, including Open RAN. It also noted progress in the 6G-MIRAI-HARMONY collaboration towards 6G standardization and applying AI advances to radio networks. This is a more credible way to frame the future. The relevance of Open RAN in Japan will depend on whether these links work in real services, not just policy plans. Open RAN is part of the move towards programmable, interoperable networks. 6G will still require its own standards, testing and deployment choices.
こちらもお読みください: Flexxible、自律型ITサポート向けAI「FlexxSolve」をリリース
結論
Japan matters because it has tested the architecture through different operator models and is helping extend the work into new markets. Yet the next stage will be decided by practical measures. Networks must integrate reliably, recover safely, use energy intelligently and remain affordable to operate.
Open RAN in Japan offers a direction, not a ready-made answer for every market. Its value will depend on whether the industry can turn openness into dependable operations. That is the harder test for the software-defined telecom era, especially where operators start from different network conditions. It will require operators to value execution as highly as 建築.


